whirlpool | refrigerator – Ice Maker Assembly Fault
Error Codes (undefined): Troubleshooting, Fixes & Prevention Tips explained below.
What Does the Ice Maker Assembly Fault Mean❓
This error indicates a failure in the ice maker assembly in your LG or other brand`s refrigerator. It can include issues with the motor, ejector arm, ice tray, or internal sensors. If any of these components fail, the refrigerator may stop producing ice or function inconsistently.
refrigerator - Common Causes of Ice Maker Assembly Fault
- Faulty motor inside the ice maker
- Ice jammed in the ejector tray
- Loose or broken wiring connection
- Internal sensor malfunction
- Damaged or worn-out ejector arm or gear
refrigerator - How to Fix Ice Maker Assembly Fault Step-by-Step❓
Reset the Refrigerator
- Unplug it for 5 to 10 minutes and plug back in.
- This may reset the ice maker electronics.
Check Ice Maker Components
- Open the freezer and inspect the ice maker unit.
- Look for signs of jammed ice or damaged moving parts.
Clear Any Blocked Ice
- Use warm water or a hairdryer (low heat) to melt stuck ice.
- Do not use sharp objects to remove ice.
Inspect Wiring
- Check the wire harness connected to the ice maker for damage or loose connections.
Replace the Ice Maker Assembly
- If damaged, replace the entire unit with a compatible LG part.
- Contact a technician if you're unsure.
refrigerator - Tips to Prevent Ice Maker Assembly Fault
- Do not overfill the freezer area
- Avoid slamming freezer doors to protect wiring
- Defrost regularly if you notice ice jams
- Clean the ice maker monthly
- Use filtered water to reduce scale and ice buildup
Frequently Asked Questions About Ice Maker Assembly Fault❓
- Question: Will the fridge still work if the ice maker is faulty?
- Answer: Yes, the fridge will cool normally, but the ice maker will not function.
- Question: How much does a replacement ice maker cost?
- Answer: Usually between ₹1200–₹3000 depending on the model.
- Question: Can I fix the motor or sensor individually?
- Answer: It is possible, but often replacing the whole assembly is more reliable.
- Question: Can a stuck ice cube cause this error?
- Answer: Yes, jammed ice can stop the motor and trigger a fault. Clear it and reset the unit.
When to Contact a Technician
If you experience any of the following issues even after completing the recommended troubleshooting steps, please contact an authorized service technician or our support team for further assistance.
- The same error appears repeatedly after restarting or resetting the unit.
- Multiple error codes appear simultaneously.
- The device makes unusual noises, vibrations, or emits a burning smell.
- The product fails to start, operate, or complete its function despite troubleshooting.
- There are signs of electrical issues, physical damage, or leakage.
- An unknown or unlisted error code appears on the display.
Query / Feedback Form
Have a question or concern? Submit your query and we`ll get back to you!