Not Found

Your multilingual tech support gateway

You can search by error code or description.

 Ex:
    1. error code EID / F1
    2. fix room temperature not cooling / washer not draining

whirlpool | dishwasher – Temperature Sensor Fault
Error Codes (undefined): Troubleshooting, Fixes & Prevention Tips explained below.

Temperature Sensor Fault in Voltas Dishwasher Explained❓

Temperature Sensor Fault in a Voltas dishwasher indicates that the sensor responsible for monitoring water or cycle temperature is malfunctioning or sending incorrect readings. This can result in improper heating cycles, poor cleaning performance, or error codes that stop the machine for safety reasons.

Common Causes of Temperature Sensor Fault in Voltas Dishwasher

  • Faulty or damaged temperature sensor.
  • Loose or corroded wiring connections.
  • Sensor contamination due to residue or mineral buildup.
  • Control board malfunction causing incorrect sensor readings.
  • Water leaks affecting sensor operation.

How to Fix Temperature Sensor Fault in Voltas Dishwasher❓

  • Power Reset

    1. Turn off and unplug the dishwasher for 5 minutes to reset the control board.
    2. Plug it back in and start a cycle to see if the error clears.

  • Inspect Temperature Sensor

    1. Locate the temperature sensor inside the dishwasher.
    2. Check for visible damage or corrosion.
    3. Test the sensor with a multimeter for continuity and correct resistance values.

  • Check Wiring and Connections

    1. Ensure the wiring connected to the sensor is intact and securely connected.
    2. Look for signs of wear, corrosion, or loose connectors.

  • Replace Faulty Sensor

    1. If the sensor fails testing, replace it with a compatible new part.

  • Call a Technician

    1. Contact a professional if the problem persists after replacing the sensor or if unsure about handling electrical components.

Tips to Prevent Temperature Sensor Fault in Voltas Dishwasher

  • Regularly clean the dishwasher to prevent residue buildup around sensors.
  • Avoid harsh chemicals that may damage sensors.
  • Inspect wiring and sensor connections during routine maintenance.
  • Ensure proper installation and handling to avoid sensor damage.
  • Use manufacturer recommended parts for replacements.

FAQs About Temperature Sensor Fault in Voltas Dishwasher❓

Question: What does a temperature sensor fault mean in a dishwasher
Answer: It means the sensor that monitors the temperature is not working correctly or sending wrong data.
Question: Can I fix the temperature sensor fault myself
Answer: Basic resets may help, but sensor replacement or wiring checks usually need professional assistance.
Question: Will the dishwasher run with a faulty temperature sensor
Answer: Often the dishwasher will stop or show error codes to prevent damage or poor performance.
Question: When should I contact a technician
Answer: If the error persists after resets or if you are unsure about handling electrical components.

When to Contact a Technician

If you experience any of the following issues even after completing the recommended troubleshooting steps, please contact an authorized service technician or our support team for further assistance.

  • The same error appears repeatedly after restarting or resetting the unit.
  • Multiple error codes appear simultaneously.
  • The device makes unusual noises, vibrations, or emits a burning smell.
  • The product fails to start, operate, or complete its function despite troubleshooting.
  • There are signs of electrical issues, physical damage, or leakage.
  • An unknown or unlisted error code appears on the display.

Query / Feedback Form

Have a question or concern? Submit your query and we`ll get back to you!