Not Found

Your multilingual tech support gateway

You can search by error code or description.

 Ex:
    1. error code EID / F1
    2. fix room temperature not cooling / washer not draining

whirlpool | dishwasher – Water Inlet Failure – Dishwasher Not Filling
Error Codes (IE): Troubleshooting, Fixes & Prevention Tips explained below.

What Does Water Inlet Failure Mean❓

Water Inlet Failure in a dishwasher means the appliance is not receiving enough or any water to start or complete a cycle. This error may be caused by a faulty water inlet valve, low water pressure, or a blocked filter. The machine might pause mid-cycle or fail to start at all when this issue occurs.

dishwasher - Common Causes of Water Inlet Failure

  • Closed or partially closed water supply valve.
  • Blocked or kinked water inlet hose.
  • Dirty or clogged inlet screen filter.
  • Faulty water inlet valve.
  • Low household water pressure.

dishwasher - Steps to Fix Water Inlet Failure❓

  • Check Water Supply

    1. Ensure the water supply valve is fully open.
    2. Confirm there is no disruption in household water supply.

  • Inspect Inlet Hose

    1. Check for kinks, blockages, or frozen sections in the hose.
    2. Clean or replace if necessary.

  • Clean Inlet Filter

    1. Disconnect the hose and remove the small inlet screen.
    2. Rinse thoroughly to remove sediment or debris.

  • Test the Inlet Valve

    1. Listen for a clicking sound during startup.
    2. If defective, the valve may need replacement.

dishwasher - Helpful Tips to Prevent Inlet Issues

  • Open the water valve fully before running the dishwasher.
  • Regularly inspect and clean the inlet filter.
  • Avoid running the dishwasher during peak water usage times.
  • Ensure the appliance is installed per manufacturer guidelines.
  • Use a water softener in hard water areas to reduce sediment buildup.

FAQs About Water Inlet Failure❓

Question: Why won’t my dishwasher fill with water?
Answer: It could be due to a closed water valve, a clogged inlet filter, or a faulty valve.
Question: Can I fix a water inlet valve myself?
Answer: If you’re comfortable with basic repairs, yes. Otherwise, it’s best to call a technician.
Question: How do I know if the valve is faulty?
Answer: If the dishwasher hums but doesn’t fill, or no water enters despite the supply being on, the valve might be the issue.
Question: Will turning off water during a cycle damage the dishwasher?
Answer: It may cause the dishwasher to pause or show an error but typically won’t damage the unit.

When to Contact a Technician

If you experience any of the following issues even after completing the recommended troubleshooting steps, please contact an authorized service technician or our support team for further assistance.

  • The same error appears repeatedly after restarting or resetting the unit.
  • Multiple error codes appear simultaneously.
  • The device makes unusual noises, vibrations, or emits a burning smell.
  • The product fails to start, operate, or complete its function despite troubleshooting.
  • There are signs of electrical issues, physical damage, or leakage.
  • An unknown or unlisted error code appears on the display.

Query / Feedback Form

Have a question or concern? Submit your query and we`ll get back to you!