Not Found

Your multilingual tech support gateway

You can search by error code or description.

 Ex:
    1. error code EID / F1
    2. fix room temperature not cooling / washer not draining

mitsubishi | dishwasher – Power Interruption – Cycle Halted
Error Codes (PF): Troubleshooting, Fixes & Prevention Tips explained below.

What Does Power Interruption Mean❓

The Power Interruption – Cycle Halted error occurs when the dishwasher unexpectedly loses electrical power during an active wash cycle. This interruption can be caused by power outages, unplugging the unit, or tripped circuit breakers. When power is restored, the dishwasher may pause or not resume the cycle, and users might see a flashing indicator or an error message. This error prevents the machine from continuing automatically and usually requires a manual reset or cycle restart.

dishwasher - Common Causes of Power Interruption

  • Temporary power outage or blackout.
  • Dishwasher accidentally unplugged or knocked loose.
  • Tripped circuit breaker or blown fuse.
  • Loose or faulty power cord connection.
  • Electrical surge or unstable power supply.

dishwasher - Steps to Fix Power Interruption Error❓

  • Check Power Source

    1. Ensure the dishwasher is securely plugged in.
    2. Check if the circuit breaker has tripped and reset it if needed.

  • Restart the Cycle

    1. Press the Start or Resume button to continue the previous cycle.
    2. If the cycle does not resume, cancel it and start a new one.

  • Perform a Reset

    1. Turn off the dishwasher, wait 1 minute, then turn it back on.
    2. Some models may require holding a button for a few seconds to reset.

  • Monitor for Repeated Interruptions

    1. If power interruptions happen frequently, consider consulting an electrician to inspect wiring or outlets.

dishwasher - Helpful Tips to Prevent Power Interruptions

  • Plug the dishwasher into a dedicated outlet with proper grounding.
  • Avoid using extension cords or power strips.
  • Keep the plug area dry and free from obstructions.
  • Install a surge protector to protect against voltage spikes.
  • Have an electrician inspect old or unreliable outlets.

FAQs About Power Interruption – Cycle Halted❓

Question: What should I do if my dishwasher stops mid-cycle
Answer: Check the power connection and try restarting the cycle after confirming electricity is restored.
Question: Will the dishwasher remember where it left off after power returns
Answer: Some models can resume from the same point, while others may require a full restart.
Question: Can frequent power cuts damage the dishwasher
Answer: Frequent interruptions may affect electronic controls over time. Using surge protection can help.
Question: Do I need to reset the dishwasher after every outage
Answer: In most cases, a reset is only needed if the cycle does not resume automatically.

When to Contact a Technician

If you experience any of the following issues even after completing the recommended troubleshooting steps, please contact an authorized service technician or our support team for further assistance.

  • The same error appears repeatedly after restarting or resetting the unit.
  • Multiple error codes appear simultaneously.
  • The device makes unusual noises, vibrations, or emits a burning smell.
  • The product fails to start, operate, or complete its function despite troubleshooting.
  • There are signs of electrical issues, physical damage, or leakage.
  • An unknown or unlisted error code appears on the display.

Query / Feedback Form

Have a question or concern? Submit your query and we`ll get back to you!