Not Found

Your multilingual tech support gateway

You can search by error code or description.

 Ex:
    1. error code EID / F1
    2. fix room temperature not cooling / washer not draining

midea | dishwasher – Drainage Failure – Dishwasher Not Draining
Error Codes (OE): Troubleshooting, Fixes & Prevention Tips explained below.

What Does Drainage Failure Mean❓

Drainage Failure in a dishwasher means the appliance is unable to properly expel used water. This could be due to blockages, pump issues, or drainage hose problems. When this error occurs, water may pool at the bottom of the unit after a cycle, potentially leading to odor or further malfunctions.

dishwasher - Common Causes of Drainage Failure

  • Clogged filter or drain basket.
  • Blocked or kinked drain hose.
  • Faulty drain pump or motor.
  • Obstruction in the garbage disposal or air gap.
  • Improper dishwasher installation or leveling.

dishwasher - Steps to Fix Drainage Failure❓

  • Clean the Filter and Drain Area

    1. Remove and clean the dishwasher filter.
    2. Check the drain area for food particles or debris.

  • Inspect the Drain Hose

    1. Ensure the hose is not kinked or clogged.
    2. Disconnect and flush it with water if necessary.

  • Check the Garbage Disposal Connection

    1. If connected to disposal, make sure the knockout plug is removed.
    2. Clean any blockage at the connection point.

  • Test the Drain Pump

    1. Listen for humming or clicking sounds.
    2. If the pump isn’t running, it may need replacement.

dishwasher - Helpful Tips to Prevent Drainage Issues

  • Scrape food off dishes before loading.
  • Clean the filter and spray arms regularly.
  • Run hot water before starting a cycle.
  • Ensure the drain hose is properly elevated.
  • Avoid overloading the dishwasher.

FAQs About Dishwasher Drainage Failure❓

Question: Can I manually drain my dishwasher?
Answer: Yes, you can remove water using a cup or sponge after powering off the unit.
Question: Is a clogged filter the most common cause?
Answer: Yes, a dirty or blocked filter is often the primary reason for poor drainage.
Question: Do I need to call a technician immediately?
Answer: Try basic troubleshooting first. If the issue persists, professional help is recommended.
Question: Can using the wrong detergent cause drainage issues?
Answer: Yes, excess suds can interfere with draining and cause blockages over time.

When to Contact a Technician

If you experience any of the following issues even after completing the recommended troubleshooting steps, please contact an authorized service technician or our support team for further assistance.

  • The same error appears repeatedly after restarting or resetting the unit.
  • Multiple error codes appear simultaneously.
  • The device makes unusual noises, vibrations, or emits a burning smell.
  • The product fails to start, operate, or complete its function despite troubleshooting.
  • There are signs of electrical issues, physical damage, or leakage.
  • An unknown or unlisted error code appears on the display.

Query / Feedback Form

Have a question or concern? Submit your query and we`ll get back to you!