midea | dishwasher – Circulation Pump/Motor Error
Error Codes (LE): Troubleshooting, Fixes & Prevention Tips explained below.
What Does Circulation Pump or Motor Error Mean❓
The Circulation Pump or Motor Error indicates that the dishwasher is unable to properly circulate water during the wash cycle. This pump is responsible for moving water through the spray arms to clean dishes effectively. If it fails or malfunctions, the dishes may come out dirty, or the cycle may stop altogether. Common signs include humming sounds, no water movement, or an error code displayed on the control panel. This issue is often linked to electrical faults, blockages, or worn-out motor components.
dishwasher - Common Causes of Circulation Pump or Motor Error
- Failed or burned-out circulation pump motor.
- Blockage in the pump or spray arm preventing water flow.
- Damaged wiring or faulty connections to the motor.
- Overheated motor due to excessive debris or wear.
- Control board not sending power to the motor.
dishwasher - Steps to Fix Circulation Pump or Motor Error❓
Restart the Dishwasher
- Turn off and unplug the dishwasher.
- Wait a few minutes and power it back on to reset the system.
Check for Blockages
- Remove the bottom rack and inspect the filter area.
- Look for food debris or objects blocking the impeller or spray arms.
Listen for Motor Sounds
- If the motor hums but does not run, it may be jammed or partially failed.
- If silent, it might not be receiving power.
Test the Circulation Pump
- Use a multimeter to check continuity if accessible.
- Replace the pump if it is electrically dead or visibly damaged.
dishwasher - Helpful Tips to Prevent Circulation Issues
- Rinse off large food scraps before loading dishes.
- Clean the filter and spray arms regularly to avoid clogs.
- Avoid overloading the dishwasher as it can stress the motor.
- Use dishwasher cleaner monthly to remove internal buildup.
- Schedule periodic inspections if your appliance is used heavily.
FAQs About Circulation Pump or Motor Error❓
- Question: Can a jammed impeller cause circulation problems
- Answer: Yes, objects like glass or food debris can block the impeller and prevent the pump from spinning properly.
- Question: Is it worth repairing a circulation pump
- Answer: If the dishwasher is relatively new and in good condition, replacing the pump is usually more cost-effective than buying a new unit.
- Question: How do I know if the motor is burned out
- Answer: If there is no sound during the wash cycle and the pump shows no electrical continuity, it may be burned out.
- Question: Can I clean the circulation pump myself
- Answer: Some parts can be accessed for cleaning, but full disassembly may require a professional technician.
When to Contact a Technician
If you experience any of the following issues even after completing the recommended troubleshooting steps, please contact an authorized service technician or our support team for further assistance.
- The same error appears repeatedly after restarting or resetting the unit.
- Multiple error codes appear simultaneously.
- The device makes unusual noises, vibrations, or emits a burning smell.
- The product fails to start, operate, or complete its function despite troubleshooting.
- There are signs of electrical issues, physical damage, or leakage.
- An unknown or unlisted error code appears on the display.
Query / Feedback Form
Have a question or concern? Submit your query and we`ll get back to you!