Your multilingual tech support gateway
You can search by error code or description.
Ex: 1. error code EID / F1 2. fix room temperature not cooling / washer not draining
The temperature sensor is disconnected or faulty. The appliance can’t detect temperature correctly during heating.
The appliance fails to reach the desired temperature in time. Likely caused by a faulty heater or temperature sensor.
After cooking, the appliance doesn’t cool down properly. May be caused by a broken cooling fan or thermal components.
Triggered when the device detects excessive temperature, potentially leading to automatic shutdown to prevent damage.
A short or stuck key was detected. Usually due to moisture, worn-out keypad, or panel failure.
Internal temperature did not reach the set level in convection mode. Could be a heater, sensor, or control issue.
Temperature sensor shorted, causing erratic readings or shutdowns during use.
Occurs when a microwave’s control panel detects a button stuck in the pressed position, causing malfunction or unresponsive controls.
Temperature remains abnormally high during convection. Often a problem with fan or sensor.
In fermentation or low-heat mode, temperature exceeds limits. Indicates a safety or sensor malfunction.
Sensor is not reading properly — either open or shorted. Appliance won’t heat correctly.
Control board and keypad are not communicating. Likely a failed ribbon cable or faulty control panel.
Internal temperature exceeds safe operating limit, especially during self-cleaning or heavy use.
No heat generated in bake or grill mode. Commonly caused by a failed heating coil or relay.
Appliance cannot lock/unlock the door during special modes like self-cleaning. Door latch motor or sensor issue likely.
Per Page: 20
Total Items: 15
