Not Found

Your multilingual tech support gateway

You can search by error code or description.

 Ex:
    1. error code EID / F1
    2. fix room temperature not cooling / washer not draining

haier | washing-machine – Water Inlet Error
Error Codes (IE): Troubleshooting, Fixes & Prevention Tips explained below.

What Does Water Inlet Error Mean❓

The Water Inlet Error appears when the washing machine fails to fill with water properly during the wash or rinse cycle. This can happen if there is a clog in the inlet filter, low water pressure, a kinked hose, or a malfunctioning inlet valve. As a safety feature, the washer will stop and show the error to prevent damage or incomplete washing.

washing-machine - What Causes the Water Inlet Error?

  • Water tap is closed or partially open.
  • Kinked or bent inlet hose blocking flow.
  • Clogged inlet mesh filter preventing water from entering.
  • Low household water pressure.
  • Faulty or damaged inlet valve in the washing machine.

washing-machine - How to Fix a Water Inlet Error❓

  • Check Water Supply

    1. Ensure the tap connected to the washer is fully open.
    2. Make sure there is no water supply interruption.

  • Inspect the Inlet Hose

    1. Look for kinks or bends in the hose.
    2. Straighten or replace if damaged.

  • Clean the Inlet Filter

    1. Turn off the water supply and unscrew the inlet hose.
    2. Remove and clean the mesh filter at the back of the washer.

  • Test Water Pressure

    1. If water flow is weak, your home's water pressure might be too low.
    2. Consider using a pressure booster or consult a plumber.

  • Replace Inlet Valve (if needed)

    1. If the valve is stuck or broken, replace it with a genuine part.
    2. This may require professional service.

washing-machine - Tips to Prevent Water Inlet Problems

  • Check and clean the inlet filter every few months.
  • Avoid bending or crushing the water supply hose.
  • Use a pressure regulator if water pressure is too high or too low.
  • Turn off the water tap when the washer is not in use.
  • Schedule yearly maintenance to inspect hoses and valves.

FAQs About Water Inlet Error❓

Question: Can I continue the wash cycle with this error?
Answer: No, the washer will not operate without enough water.
Question: Is cleaning the inlet filter safe to do myself?
Answer: Yes, just turn off the water and power first.
Question: How do I know if the inlet valve is bad?
Answer: If the filter and hose are fine but no water flows, the valve may be faulty.
Question: What if water flows too slowly?
Answer: Check for sediment in the filter or low home water pressure.
Question: How much does a valve replacement cost?
Answer: It typically ranges from ₹500–₹1500 for parts, plus labor if done professionally.

When to Contact a Technician

If you experience any of the following issues even after completing the recommended troubleshooting steps, please contact an authorized service technician or our support team for further assistance.

  • The same error appears repeatedly after restarting or resetting the unit.
  • Multiple error codes appear simultaneously.
  • The device makes unusual noises, vibrations, or emits a burning smell.
  • The product fails to start, operate, or complete its function despite troubleshooting.
  • There are signs of electrical issues, physical damage, or leakage.
  • An unknown or unlisted error code appears on the display.

Query / Feedback Form

Have a question or concern? Submit your query and we`ll get back to you!