Not Found

Your multilingual tech support gateway

You can search by error code or description.

 Ex:
    1. error code EID / F1
    2. fix room temperature not cooling / washer not draining

haier | dishwasher – Water Inlet Error
Error Codes (undefined): Troubleshooting, Fixes & Prevention Tips explained below.

Dishwasher Water Inlet Problem Detected❓

The Water Inlet Error in a dishwasher occurs when the machine is unable to fill with water at the start of a wash cycle. This may be due to a closed or faulty water supply valve, blocked inlet hose, low water pressure, or a malfunctioning inlet valve. The dishwasher may halt the cycle and display an error to prevent damage and ensure proper cleaning.

What Can Cause Water Inlet Errors in Dishwashers

  • Water supply valve is closed or partially open.
  • Kinked or clogged inlet hose.
  • Dirty or blocked inlet filter screen.
  • Low or no water pressure from the source.
  • Faulty inlet valve or control board.

How to Fix Water Inlet Error in Dishwasher❓

  • Check the Water Supply Valve

    1. Ensure the tap connected to the dishwasher is turned on fully.
    2. Verify that water is reaching the appliance.

  • Inspect the Inlet Hose

    1. Look for kinks, bends, or visible damage in the hose.
    2. Disconnect and flush the hose to clear any blockages.

  • Clean the Inlet Filter

    1. Locate the inlet filter at the hose connection point.
    2. Remove debris or mineral buildup.

  • Reset the Dishwasher

    1. Turn off power to the dishwasher for a few minutes.
    2. Restart the cycle and check for normal operation.

  • Call for Service

    1. If the error continues, the inlet valve may be faulty and require technician replacement.

Helpful Tips to Prevent Inlet Errors

  • Keep the water inlet filter clean to ensure good flow.
  • Do not run the dishwasher when water pressure is low.
  • Inspect hoses regularly for bends or wear.
  • Make sure the inlet tap is fully opened before starting.
  • Schedule periodic maintenance to catch valve issues early.

FAQs About Water Inlet Error in Dishwashers❓

Question: Why is my dishwasher not filling with water
Answer: This is usually caused by a closed tap, blocked hose, or inlet valve issue.
Question: Can I clean the inlet filter myself
Answer: Yes, the filter is usually located at the connection point of the inlet hose.
Question: Is low water pressure a problem
Answer: Yes, dishwashers require a minimum pressure to function properly.
Question: Will this error stop the wash cycle
Answer: Yes, the dishwasher will halt operation to prevent damage.
Question: When should I call a technician
Answer: If cleaning and checking the hose doesn’t help, the valve may need replacement.

When to Contact a Technician

If you experience any of the following issues even after completing the recommended troubleshooting steps, please contact an authorized service technician or our support team for further assistance.

  • The same error appears repeatedly after restarting or resetting the unit.
  • Multiple error codes appear simultaneously.
  • The device makes unusual noises, vibrations, or emits a burning smell.
  • The product fails to start, operate, or complete its function despite troubleshooting.
  • There are signs of electrical issues, physical damage, or leakage.
  • An unknown or unlisted error code appears on the display.

Query / Feedback Form

Have a question or concern? Submit your query and we`ll get back to you!