Not Found

Your multilingual tech support gateway

You can search by error code or description.

 Ex:
    1. error code EID / F1
    2. fix room temperature not cooling / washer not draining

godrej | refrigerator – Auto Door Position Fault
Error Codes (undefined): Troubleshooting, Fixes & Prevention Tips explained below.

What Does the AD (Auto Door Position) Fault Mean❓

The AD error indicates a problem with the auto door position sensor in the refrigerator. This sensor detects whether the door is open, closed, or in an intermediate position and allows the refrigerator to adjust functions accordingly, such as interior lighting, cooling cycles, or alarms. When the sensor malfunctions or sends incorrect readings, the fridge may fail to properly detect door status, causing erratic behavior like lights staying on, alarms sounding unnecessarily, or cooling inefficiencies. Promptly addressing this fault prevents energy waste and maintains normal fridge operation.

refrigerator - Common Reasons Behind AD Auto Door Position Fault

  • Loose or disconnected wiring to the door position sensor causing intermittent signals.
  • Dirt, dust, or moisture on the sensor or door contact points interfering with sensor accuracy.
  • Physical damage to the sensor or its mounting bracket, including corrosion or impact damage.
  • Misalignment or improper closing of the refrigerator door affecting sensor detection.
  • Control board faults causing incorrect sensor data interpretation or error reporting.

refrigerator - Step-by-Step Guide to Fix AD Auto Door Position Fault❓

  • Power Cycle the Refrigerator

    1. Unplug the refrigerator from the power source and wait 5 minutes.
    2. Plug it back in and check if the error clears.

  • Locate the Door Position Sensor

    1. Open the refrigerator door and locate the door position sensor, usually near the hinge or door frame.
    2. Inspect the sensor and wiring for signs of damage, dirt, or loose connections.

  • Clean the Sensor and Door Contact Points

    1. Wipe the sensor and magnetic or mechanical contacts gently with a dry cloth.
    2. Avoid moisture or cleaning sprays that might damage components.

  • Check Door Alignment

    1. Ensure the door is properly aligned and closes fully without obstruction.
    2. Misaligned doors can cause incorrect sensor readings.

  • Inspect Wiring and Connections

    1. Look for any loose, frayed, or corroded wires connecting the sensor to the control board.
    2. Repair or replace damaged wiring if necessary.

  • Replace the Door Position Sensor if Needed

    1. Purchase the correct replacement sensor compatible with your model.
    2. Follow manufacturer instructions or hire a technician for safe replacement.

refrigerator - Helpful Tips to Prevent AD Auto Door Position Fault

  • Keep the door sensor and contact points clean and free from debris.
  • Avoid slamming or forcing the refrigerator door to prevent sensor damage.
  • Regularly check door alignment and adjust if necessary to ensure proper closing.
  • Inspect sensor wiring during routine maintenance to detect loose or damaged wires early.
  • Schedule professional maintenance annually to maintain sensor and control board health.

Frequently Asked Questions on AD Auto Door Position Fault❓

Question: What happens if the AD auto door position fault is ignored?
Answer: Ignoring this fault can cause the refrigerator to misinterpret door status, leading to lights staying on unnecessarily, alarms sounding without cause, and possible increased energy consumption.
Question: Can I clean the sensor myself?
Answer: Yes, you can clean the sensor and contacts safely with a dry cloth after unplugging the fridge, but avoid moisture or harsh chemicals.
Question: How much does it cost to replace the door position sensor?
Answer: Replacement sensor costs typically range from ₹800 to ₹1700 depending on model and technician fees.
Question: Will this fault affect cooling performance?
Answer: Yes, if the refrigerator thinks the door is open, cooling cycles may be disrupted, reducing efficiency.
Question: Should I call a technician to fix this error?
Answer: If you are not confident in checking or replacing sensors, it is best to contact a professional technician to avoid damage or warranty voiding.

When to Contact a Technician

If you experience any of the following issues even after completing the recommended troubleshooting steps, please contact an authorized service technician or our support team for further assistance.

  • The same error appears repeatedly after restarting or resetting the unit.
  • Multiple error codes appear simultaneously.
  • The device makes unusual noises, vibrations, or emits a burning smell.
  • The product fails to start, operate, or complete its function despite troubleshooting.
  • There are signs of electrical issues, physical damage, or leakage.
  • An unknown or unlisted error code appears on the display.

Query / Feedback Form

Have a question or concern? Submit your query and we`ll get back to you!