Your multilingual tech support gateway
You can search by error code or description.
Washing machine did not fill with water within the expected time. Check water supply and inlet valves.
Washer is unable to drain water. Clean the drain filter and check the drain hose.
The washer detected an uneven load. Redistribute clothes or reduce load size.
Too much water in the drum. Possible fault with inlet valve or water sensor.
Indicates a malfunction with the water level sensor or its wiring.
Washer door is open or not locking properly. Check the latch and close the door firmly.
Control panel buttons are locked. Hold the designated buttons to deactivate.
Temperature sensor failure or wiring issue. Washer cannot detect water temperature.
Too much detergent used, or high-efficiency detergent not used. Washer runs a cleaning cycle.
Motor is overloaded or unable to spin. Could be a foreign object or electrical fault.
Overcurrent to motor or electrical issue. Try unplugging washer and restarting.
Power was interrupted during cycle. Resume or restart the program.
The washer suggests running a tub clean cycle. Maintenance notification.
Indicates an internal fault in the washer`s main control or sensors. May need technician.
Motor control problem – may require motor or PCB check.
Pressure sensor error – may not detect correct water level.
Hot/cold water hoses are incorrectly connected.
Water not draining – blocked filter or pump issue.
Voltage outside normal range – inverter motor protection triggered.
Communication error between control board and motor inverter.
Per Page: 20
Total Items: 31
