Not Found

Your multilingual tech support gateway

You can search by error code or description.

mitsubishi | air-conditioner Error Codes: Troubleshooting, Fixes & Prevention Tips explained below.

What Does the SE Code Mean?❓

SE stands for “Sensor Error” or “Spin Error” and often signals that the motor has failed to function properly. It could also result from a problem with the Hall sensor, which monitors the motor’s speed and position. If this sensor fails or its wiring is disrupted, the washer cannot spin safely and will stop the cycle.

air-conditioner - What Causes the SE Code?

  • Faulty Hall sensor (motor position sensor)
  • Loose or damaged wire connections to motor
  • Burned or shorted motor
  • Defective control PCB (main board)
  • Excessive load causing strain on the motor
  • Water or corrosion damage to electrical parts

air-conditioner - How to Fix SE Code on LG Washer❓

  • Restart the Machine

    1. Turn off and unplug the washer.
    2. Wait 5 minutes and plug it back in.

  • Check the Wiring

    1. Remove the back panel and check motor connectors.
    2. Look for burns, loose wires, or moisture.

  • Inspect the Hall Sensor

    1. Test the motor sensor with a multimeter.
    2. Replace if it’s malfunctioning.

  • Examine the Control Board

    1. Look for burn marks or blown components.
    2. Replace the board if necessary.

air-conditioner - Helpful Tips

  • Avoid overloading the washer to reduce motor strain.
  • Always use a surge protector to protect electronics.
  • Clean moisture or lint near the motor area regularly.
  • Schedule routine maintenance for internal components.
  • Don’t ignore early signs like unusual motor sounds.

Frequently Asked Questions❓

Question: Is the SE error dangerous?
Answer: It’s not immediately dangerous but indicates a problem that should be addressed to prevent further damage.
Question: Can I replace the Hall sensor myself?
Answer: If you are comfortable with appliance repair and have tools, yes. Otherwise, contact a technician.
Question: Will a reset clear the SE code permanently?
Answer: A reset may temporarily clear the error, but if the cause isn’t fixed, the code will likely return.

Query Form

Have a question or concern? Submit your query and we`ll get back to you!