godrej | air-conditioner Error Codes: Troubleshooting, Fixes & Prevention Tips explained below.
What Does CH08 Error Mean?❓
The CH08 error code occurs when the indoor pipe temperature sensor sends incorrect or no data to the control board. This sensor monitors refrigerant temperatures and helps control cooling efficiency. A fault here can result in improper cooling or AC shutdown to prevent system damage.
air-conditioner - What Causes the CH08 Error?
- Sensor wire is disconnected or broken
- Sensor is damaged or shorted
- Sensor readings are outside normal range
- PCB is not receiving signal
- Moisture or corrosion on terminals
air-conditioner - Step-by-Step Fix for CH08 Error❓
Turn Off the AC
- Unplug the unit or switch off the power from the main supply
Locate the Sensor
- Open the indoor unit panel carefully
- Look for a small tube or wire attached to the refrigerant line
Check for Loose Connections
- Ensure the sensor is plugged in tightly
- Check for damaged wires or terminals
Replace the Sensor if Needed
- If it looks burned, swollen, or broken, replace it with the same model
Seek Professional Help
- If unsure, call a certified technician to inspect and repair the issue safely
air-conditioner - Helpful Tips to Prevent CH08 Error
- Never wash the AC with high-pressure water
- Ensure proper drainage to avoid internal moisture
- Keep indoor unit dust-free
- Get sensors checked during yearly maintenance
- Use surge protectors to protect AC electronics
Frequently Asked Questions About CH08 Error❓
- Question: Can I use the AC with CH08 error?
- Answer: It is not recommended. The cooling might not work correctly and it can cause further damage.
- Question: Is this a serious problem?
- Answer: It can become serious if ignored. Sensors help regulate the cooling cycle.
- Question: What is the cost of replacing a temperature sensor?
- Answer: Indoor pipe sensors usually cost between ₹300–₹800 depending on the brand.
Query Form
Have a question or concern? Submit your query and we`ll get back to you!