Not Found

Your multilingual tech support gateway

You can search by error code or description.

Water Inlet Failure – Dishwasher Not Filling (DW-IE-1E-4E)

Dishwasher is unable to fill with water. Causes: closed water tap, low water pressure, blocked inlet filter, or faulty inlet valve.

Drainage Failure – Dishwasher Not Draining (DW-OE-5E-E24)

Water remains inside after wash. Likely causes: clogged drain filter, blocked or kinked drain hose, or faulty drain pump.

Leak Detected – Water in Base Tray (DW-AE-E1-LE)

Water has leaked into the base of the dishwasher. Triggered by the leak sensor. Check door seals, hoses, and float switch.

Overflow Error – Too Much Water Inside (DW-FE)

Dishwasher is overfilled. May be caused by faulty water inlet valve, float switch, or level sensor.

Heating System Failure – Water Not Heating (DW-HE-tE-E09)

Water is not reaching desired temperature. Could be due to a broken heating element, faulty thermistor, or wiring issue.

Circulation Pump/Motor Error (DW-LE-CE-E20)

The motor responsible for spraying water is jammed, overheated, or electrically faulty.

Oversudsing Error – Too Much Detergent (DW-bE-SUD)

Excess foam detected in the tub. Caused by using regular dish soap or overdosing detergent. Run rinse cycle and avoid repeat use.

Control Panel Locked – Child Lock Active (DW-CL-LOC)

Buttons are unresponsive because the child lock is enabled. Disable by holding down specific button(s) for 3–5 seconds.

Power Interruption – Cycle Halted (DW-PF)

Power was lost during the cycle. The dishwasher may resume or need to be restarted manually.

Spray Arm/Diverter Error – Water Not Circulating Properly (DW-nE)

The diverter motor that switches water flow between spray arms is malfunctioning. Check for jams or replace motor.

Tub Clean Reminder – Maintenance Alert (DW-tCL-0C)

Not a fault. Indicates it’s time to run a tub cleaning cycle to maintain hygiene and performance.

5C Error – Not Draining (SD-5C)

Water not draining properly – clogged filter or pump issue.

Error 7E – WaterWall Stuck (SD-7E)

WaterWall bar not moving – obstruction or motor failure.

LC Error – Leak Detected (SD-LC)

Leak in bottom tray triggers shutdown – water safety feature.

bE2 Error – Stuck Button (SD-bE2)

Touchpad button is stuck – caused by moisture or faulty panel.

Water Inlet Error (VD‑E1)

Check water supply inlet hose and valve.

Drain Problem (VD‑E2)

Water not draining – check hose filter and pump.

Water Leakage / Overflow (VD‑E3)

Leak inside or overflow – check seals and connections.

Heater Fault (VD‑E4)

Heating element may be faulty or disconnected.

Temperature Sensor Fault (VD‑E5)

Temperature sensor/thermistor faulty or reading wrong.

20

Next

25