Your multilingual tech support gateway
You can search by error code or description.
Washing machine did not fill with water within the expected time. Check water supply and inlet valves.
Washer is unable to drain water. Clean the drain filter and check the drain hose.
The washer detected an uneven load. Redistribute clothes or reduce load size.
Too much water in the drum. Possible fault with inlet valve or water sensor.
Indicates a malfunction with the water level sensor or its wiring.
Washer door is open or not locking properly. Check the latch and close the door firmly.
Control panel buttons are locked. Hold the designated buttons to deactivate.
Temperature sensor failure or wiring issue. Washer cannot detect water temperature.
Too much detergent used, or high-efficiency detergent not used. Washer runs a cleaning cycle.
Motor is overloaded or unable to spin. Could be a foreign object or electrical fault.
Overcurrent to motor or electrical issue. Try unplugging washer and restarting.
Power was interrupted during cycle. Resume or restart the program.
The washer suggests running a tub clean cycle. Maintenance notification.
Indicates an internal fault in the washer`s main control or sensors. May need technician.
Dishwasher is unable to fill with water. Causes: closed water tap, low water pressure, blocked inlet filter, or faulty inlet valve.
Water remains inside after wash. Likely causes: clogged drain filter, blocked or kinked drain hose, or faulty drain pump.
Water has leaked into the base of the dishwasher. Triggered by the leak sensor. Check door seals, hoses, and float switch.
Dishwasher is overfilled. May be caused by faulty water inlet valve, float switch, or level sensor.
Water is not reaching desired temperature. Could be due to a broken heating element, faulty thermistor, or wiring issue.
The motor responsible for spraying water is jammed, overheated, or electrically faulty.
Per Page: 20
Total Items: 189
